Jiashan Bangsheng Bearing Co., Ltd.
Add：No. 38, Jinjia Avenue, Jiashan County, Zhejiang Province
Tel：86-573-84252262
Fax：86-573-84252262
Mob：15067330806 13957343967
Url：www.whsdcx.cn
Product
Fb09g solid inlaid bronze rolling bearing
Description
Fb09g solid inlaid bronze rolling bearing is made of bronze material with special solid lubricant embedded on its surface. As the copper alloy material with high elongation is used as the base, it can be made into a very thin rolling shaft sleeve. In addition, the ideal filling material is a wear-resistant agent, so it is suitable for use as a wear-resistant shaft sleeve in automobile transmission shaft, and it can also be used in oil-free lubrication For other occasions.
TECHNICAL DATE
Maximum load
Dead load
120N/mm2
hardness
HB 90-120
Dynamic bearing
40N/mm2
Elongation rate
40%
Maximum speed
2m/s
Service temperature
-100℃~＋200℃
Max PV
2.8N/mm2.m/s
friction coefficient
0.01~0.05
tensile strength
450N/mm2
Thermal conductivity
60W(m.K)-1
Yield strength
250N/mm2
Coefficient of linear expansion
12x10-6K
APPLICATION CHARACTER
1.No or less oil lubrication; 2.High load, low speed, high performance, superior to other bearings at medium speed; 3.It is suitable for the parts with frequent start and stop of reciprocating and swing motion which are difficult to form oil film; 4.In the operation process, it can form the transfer of lubrication pad, play a role of protection and friction, without biting, and increase the lubricity; 5.It can reduce vibration, noise, environmental pollution and maintenance times; 6.Thin wall structure, light weight, can reduce the mechanical volume, and save cost compared with the price of jdb-650 shaft sleeve; 7.It is especially suitable for high temperature, or the occasion where it is difficult to refuel or cannot be refueled; 8.The product has been used in automobile starting motor, elevator, crane and metallurgic machinery, etc
